MYSILO is the only company in the world that uses corrugated steel with the shortest wavelength of 65 mm (2.56″) in the production of silo sidewall sheets.

When calculating the strength of the silo structure, the wavelength of the sheet must be taken into account – the shorter the wavelength, the stronger the structure.

The roof at an angle of 40° is designed and manufactured based on the calculation that the rate of compaction of the compound feed will provide a larger volume for storage compared to a 30° slope.

The fodder silo body is installed on seamless galvanized legs. The strong cross construction between the legs enhances stability and balance. The spacer plate helps to distribute the weight in the silo more evenly.
The anti-drip ring prevents moisture from entering.
Mobile stairs are designed to provide ergonomics and safety.

At all points of connection of the sheets of the side walls of the silo and stiffeners, high-quality bolts Grade 8 (10.9K) with DACROMET 500 coating are used, which protects against corrosion and significantly increases the service life.

Polyethylene conical washers of high density are also used.

MYSILO roofs come in standard 600 g/m2 galvanization with a sheet quality of 420 N/mm2 (61,000 kg/cm3), which is unique among other silo manufacturers.

The roof structure can be designed with a maximum wind speed of 209 km/h, a snow load of 196 kg/m2 and a maximum peak load on the center of the roof of 13,608 kg.

All roofs are equipped with an inspection hatch that provides reliable protection against atmospheric influences.

MYSILO uses S350GD+Z galvanized hot-dip galvanizing to produce stiffeners. The stiffening ribs have a double-sided zinc coating of 600 g/m2.

Hot and frost-resistant mastic is used in the joints of the sidewall sheets to ensure excellent sealing in all climatic conditions.